INSTRUCTIONS
|
|
INSTRUCTIONS
|
|
Modern Floral Arrangement
Instructions

* Create new designs by
sliding the connectors
along the length of the vials.

* Vials can be angled,
raised, or lowered to form
three-dimensional designs.
It is easier to raise or lower
the vials when the
connectors are closer together.

* To attach or detach connectors, place The Flex Vase on a flat surface and gently slide the connectors over the top or base of
the vials.
home
flex vase
products
about us
newsletter
link
contact
order

Tips:

* Handwash
with mild soap
and warm water.

* Design smaller arrangements by removing the connectors at the point(s) where you wish to divide the vase.

* To attach The Flex Vase to a window or mirror, wet the back
of the suction cups and press firmly to
the glass with your fingers. Then press
center of the cups
with a pencil eraser. Make sure suction cups are secured before hooking the suction cup hooks underneath the top connectors of the
vase.

* To securely attach your vase to a glass surface, use 1 suction cup for 2- or 3-vial vases; 2 cups for vases with 3 to 10 vials; 3 cups for
vases with 11 to 15 vials.

Design Pattern Ideas
More Tips:

* To create a multi-level V-shape arrangement with the 15-vial Flex Vase,
put the first five vials (beginning at the V-point) at table surface level, to
serve as a base. Then raise the remaining vials to desired heights.

* A fan effect can be created by starting with the V-shape and folding back
the two sides and angling the vials to form the desired shape.

* The extra connectors also can be used to create various enclosed
shapes – circle, square, heart, etc. To extend floral arrangements, use the
two extra connectors to attach additional vials.

* Design smaller arrangements by removing the connectors at the point(s) where you wish to divide the vase.

* To avoid breakage, lay the vase on its side when adding glass stones.

Home | Flex Vase | Products | About Us | Newsletter | Links | Contact | Order
Artist Profile | Designs | Instructions | Creative Ideas | Flex in the News

Copyright © 2002 Andy Designs, Ltd. All Rights Reserved.